pub struct PgConnection { /* private fields */ }Expand description
The connection string expected by PgConnection::establish
should be a PostgreSQL connection string, as documented at
https://www.postgresql.org/docs/9.4/static/libpq-connect.html#LIBPQ-CONNSTRING
Every error the server reports carries its SQLSTATE in
DatabaseErrorInformation::sqlstate, including custom codes raised with
RAISE.
Errors that happen before the server answers, such as a failure to send a
query, carry none. The codes PostgreSQL defines are constants in
sql_state.
§Supported loading model implementations
If you are unsure which loading mode is the correct one for your application,
you likely want to use the DefaultLoadingMode as it’s simpler and more intuitive.
However, if you plan to process each row on its own, you should use the PgRowByRowLoadingMode and
you can also expect a performance boost.
Due to the fact that PgConnection supports multiple loading modes
it is required to always specify the used loading mode
when calling RunQueryDsl::load_iter
§DefaultLoadingMode
By using this mode PgConnection defaults to loading all response values at once
and only performs deserialization afterward for the DefaultLoadingMode.
This loading mode allows users to perform hold more than one iterator at once using the same connection:
use diesel::connection::DefaultLoadingMode;
let iter1 = users::table.load_iter::<(i32, String), DefaultLoadingMode>(connection)?;
let iter2 = users::table.load_iter::<(i32, String), DefaultLoadingMode>(connection)?;
for r in iter1 {
let (id, name) = r?;
println!("Id: {} Name: {}", id, name);
}
for r in iter2 {
let (id, name) = r?;
println!("Id: {} Name: {}", id, name);
}§PgRowByRowLoadingMode
By using this mode PgConnection defaults to loading each row of the result set
separately. This might be desired for huge result sets.
This loading mode prevents creating more than one iterator at once using the same connection. The following code is not allowed:
use diesel::pg::PgRowByRowLoadingMode;
let iter1 = users::table.load_iter::<(i32, String), PgRowByRowLoadingMode>(connection)?;
// creating a second iterator generates an compiler error
let iter2 = users::table.load_iter::<(i32, String), PgRowByRowLoadingMode>(connection)?;
for r in iter1 {
let (id, name) = r?;
println!("Id: {} Name: {}", id, name);
}
for r in iter2 {
let (id, name) = r?;
println!("Id: {} Name: {}", id, name);
}Implementations§
Source§impl PgConnection
impl PgConnection
Sourcepub fn build_transaction(&mut self) -> TransactionBuilder<'_, PgConnection>
pub fn build_transaction(&mut self) -> TransactionBuilder<'_, PgConnection>
Build a transaction, specifying additional details such as isolation level
See TransactionBuilder for more examples.
conn.build_transaction()
.read_only()
.serializable()
.deferrable()
.run(|conn| Ok(()))Sourcepub fn version(&self) -> Result<DatabaseVersion, Error>
pub fn version(&self) -> Result<DatabaseVersion, Error>
Returns the version of the server this connection is connected to, with a patch of zero since PostgreSQL 10 numbers releases major.minor.
§Errors
Fails with DatabaseErrorKind::ClosedConnection once the connection is lost.
§Example
use diesel::connection::DatabaseVersion;
let supports_returning_old = conn.version()? >= DatabaseVersion::new(18, 0, 0);Sourcepub fn notifications_iter(
&mut self,
) -> impl Iterator<Item = Result<PgNotification, Error>>
pub fn notifications_iter( &mut self, ) -> impl Iterator<Item = Result<PgNotification, Error>>
See Postgres documentation for SQL commands NOTIFY and LISTEN
The returned iterator can yield items even after a None value when new notifications have been received.
The iterator can be polled again after a None value was received as new notifications might have
been send in the mean time.
§Example
// register the notifications channel we want to receive notifications for
diesel::sql_query("LISTEN example_channel").execute(connection)?;
// send some notification
// this is usually done from a different connection/thread/application
diesel::sql_query("NOTIFY example_channel, 'additional data'").execute(connection)?;
for result in connection.notifications_iter() {
let notification = result.unwrap();
assert_eq!(notification.channel, "example_channel");
assert_eq!(notification.payload, "additional data");
println!(
"Notification received from server process with id {}.",
notification.process_id
);
}Trait Implementations§
Source§impl Connection for PgConnection
impl Connection for PgConnection
Source§type TransactionManager = AnsiTransactionManager
type TransactionManager = AnsiTransactionManager
Source§fn establish(database_url: &str) -> Result<PgConnection, ConnectionError>
fn establish(database_url: &str) -> Result<PgConnection, ConnectionError>
Source§fn execute_returning_count<T>(&mut self, source: &T) -> Result<usize, Error>
fn execute_returning_count<T>(&mut self, source: &T) -> Result<usize, Error>
Source§fn transaction_state(&mut self) -> &mut AnsiTransactionManagerwhere
PgConnection: Sized,
fn transaction_state(&mut self) -> &mut AnsiTransactionManagerwhere
PgConnection: Sized,
Source§fn instrumentation(&mut self) -> &mut (dyn Instrumentation + 'static)
fn instrumentation(&mut self) -> &mut (dyn Instrumentation + 'static)
Source§fn set_instrumentation(&mut self, instrumentation: impl Instrumentation)
fn set_instrumentation(&mut self, instrumentation: impl Instrumentation)
Instrumentation implementation for this connectionSource§fn set_prepared_statement_cache_size(&mut self, size: CacheSize)
fn set_prepared_statement_cache_size(&mut self, size: CacheSize)
CacheSize for this connectionSource§fn transaction<T, E, F>(&mut self, f: F) -> Result<T, E>
fn transaction<T, E, F>(&mut self, f: F) -> Result<T, E>
impl ConnectionSealed for PgConnection
Source§impl<T, A> ExecuteCopyFromDsl<PgConnection> for CopyFromQuery<T, A>where
A: CopyFromExpression<T>,
Available on crate feature postgres only.
impl<T, A> ExecuteCopyFromDsl<PgConnection> for CopyFromQuery<T, A>where
A: CopyFromExpression<T>,
postgres only.Source§impl GetPgMetadataCache for PgConnection
impl GetPgMetadataCache for PgConnection
Source§fn get_metadata_cache(&mut self) -> &mut PgMetadataCache
fn get_metadata_cache(&mut self) -> &mut PgMetadataCache
PgMetadataCacheSource§impl<B> LoadConnection<B> for PgConnectionwhere
PgConnection: PgLoadingMode<B>,
impl<B> LoadConnection<B> for PgConnectionwhere
PgConnection: PgLoadingMode<B>,
Source§type Cursor<'conn, 'query> = <PgConnection as PgLoadingMode<B>>::Cursor<'conn, 'query>
type Cursor<'conn, 'query> = <PgConnection as PgLoadingMode<B>>::Cursor<'conn, 'query>
LoadConnection::load Read moreSource§type Row<'conn, 'query> = <PgConnection as PgLoadingMode<B>>::Row<'conn, 'query>
type Row<'conn, 'query> = <PgConnection as PgLoadingMode<B>>::Row<'conn, 'query>
Iterator::Item for the iterator implementation
of LoadConnection::CursorSource§fn load<'conn, 'query, T>(
&'conn mut self,
source: T,
) -> Result<<PgConnection as LoadConnection<B>>::Cursor<'conn, 'query>, Error>where
T: Query + QueryFragment<<PgConnection as Connection>::Backend> + QueryId + 'query,
<PgConnection as Connection>::Backend: QueryMetadata<<T as Query>::SqlType>,
fn load<'conn, 'query, T>(
&'conn mut self,
source: T,
) -> Result<<PgConnection as LoadConnection<B>>::Cursor<'conn, 'query>, Error>where
T: Query + QueryFragment<<PgConnection as Connection>::Backend> + QueryId + 'query,
<PgConnection as Connection>::Backend: QueryMetadata<<T as Query>::SqlType>,
Source§impl MigrationConnection for PgConnection
Available on crate feature postgres only.
impl MigrationConnection for PgConnection
postgres only.Source§impl MultiConnectionHelper for PgConnection
impl MultiConnectionHelper for PgConnection
Source§fn to_any<'a>(
lookup: &mut <<PgConnection as Connection>::Backend as TypeMetadata>::MetadataLookup,
) -> &mut (dyn Any + 'a)
fn to_any<'a>( lookup: &mut <<PgConnection as Connection>::Backend as TypeMetadata>::MetadataLookup, ) -> &mut (dyn Any + 'a)
Source§fn from_any(
lookup: &mut (dyn Any + 'static),
) -> Option<&mut <<PgConnection as Connection>::Backend as TypeMetadata>::MetadataLookup>
fn from_any( lookup: &mut (dyn Any + 'static), ) -> Option<&mut <<PgConnection as Connection>::Backend as TypeMetadata>::MetadataLookup>
Source§impl R2D2Connection for PgConnection
Available on crate feature r2d2 only.
impl R2D2Connection for PgConnection
r2d2 only.impl Send for PgConnection
Source§impl SimpleConnection for PgConnection
impl SimpleConnection for PgConnection
Source§impl<'b, Changes, Output> UpdateAndFetchResults<Changes, Output> for PgConnectionwhere
Changes: Copy + AsChangeset<Target = <Changes as HasTable>::Table> + IntoUpdateTarget,
UpdateStatement<<Changes as HasTable>::Table, <Changes as IntoUpdateTarget>::WhereClause, <Changes as AsChangeset>::Changeset>: LoadQuery<'b, PgConnection, Output>,
<<Changes as HasTable>::Table as Table>::AllColumns: ValidGrouping<()> + SelectableExpression<ReturningQuerySource<UpdateStmt, <Changes as HasTable>::Table>>,
<<<Changes as HasTable>::Table as Table>::AllColumns as ValidGrouping<()>>::IsAggregate: MixedAggregates<No, Output = No>,
Available on crate feature postgres only.
impl<'b, Changes, Output> UpdateAndFetchResults<Changes, Output> for PgConnectionwhere
Changes: Copy + AsChangeset<Target = <Changes as HasTable>::Table> + IntoUpdateTarget,
UpdateStatement<<Changes as HasTable>::Table, <Changes as IntoUpdateTarget>::WhereClause, <Changes as AsChangeset>::Changeset>: LoadQuery<'b, PgConnection, Output>,
<<Changes as HasTable>::Table as Table>::AllColumns: ValidGrouping<()> + SelectableExpression<ReturningQuerySource<UpdateStmt, <Changes as HasTable>::Table>>,
<<<Changes as HasTable>::Table as Table>::AllColumns as ValidGrouping<()>>::IsAggregate: MixedAggregates<No, Output = No>,
postgres only.Source§fn update_and_fetch(&mut self, changeset: Changes) -> Result<Output, Error>
fn update_and_fetch(&mut self, changeset: Changes) -> Result<Output, Error>
Auto Trait Implementations§
impl !RefUnwindSafe for PgConnection
impl !Sync for PgConnection
impl !UnwindSafe for PgConnection
impl Forget for PgConnection
impl Freeze for PgConnection
impl Move for PgConnection
impl Unpin for PgConnection
impl UnsafeUnpin for PgConnection
Blanket Implementations§
Source§impl<T> AggregateExpressionMethods for T
impl<T> AggregateExpressionMethods for T
Source§fn aggregate_distinct(self) -> Self::Outputwhere
Self: DistinctDsl,
fn aggregate_distinct(self) -> Self::Outputwhere
Self: DistinctDsl,
DISTINCT modifier for aggregate functions Read moreSource§fn aggregate_all(self) -> Self::Outputwhere
Self: AllDsl,
fn aggregate_all(self) -> Self::Outputwhere
Self: AllDsl,
ALL modifier for aggregate functions Read moreSource§fn aggregate_filter<P>(self, f: P) -> Self::Output
fn aggregate_filter<P>(self, f: P) -> Self::Output
Source§fn aggregate_order<O>(self, o: O) -> Self::Outputwhere
Self: OrderAggregateDsl<O>,
fn aggregate_order<O>(self, o: O) -> Self::Outputwhere
Self: OrderAggregateDsl<O>,
Source§impl<T> AsAny for Twhere
T: Any,
impl<T> AsAny for Twhere
T: Any,
fn as_any_ref(&self) -> &(dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Source§impl<'a, T, E> AsTaggedExplicit<'a, E> for Twhere
T: 'a,
impl<'a, T, E> AsTaggedExplicit<'a, E> for Twhere
T: 'a,
Source§impl<'a, T, E> AsTaggedImplicit<'a, E> for Twhere
T: 'a,
impl<'a, T, E> AsTaggedImplicit<'a, E> for Twhere
T: 'a,
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<C> BoxableConnection<<C as Connection>::Backend> for Cwhere
C: Connection + Any,
impl<C> BoxableConnection<<C as Connection>::Backend> for Cwhere
C: Connection + Any,
impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
Source§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
Source§fn into_any(self: Box<T>) -> Box<dyn Any>
fn into_any(self: Box<T>) -> Box<dyn Any>
Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>, which can then be
downcast into Box<dyn ConcreteType> where ConcreteType implements Trait.Source§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Rc<Trait> (where Trait: Downcast) to Rc<Any>, which can then be further
downcast into Rc<ConcreteType> where ConcreteType implements Trait.Source§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
&Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s.Source§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
&mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s.Source§impl<T> DowncastSend for T
impl<T> DowncastSend for T
Source§impl<T> FmtForward for T
impl<T> FmtForward for T
Source§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
self to use its Binary implementation when Debug-formatted.Source§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
self to use its Display implementation when
Debug-formatted.Source§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
self to use its LowerExp implementation when
Debug-formatted.Source§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
self to use its LowerHex implementation when
Debug-formatted.Source§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
self to use its Octal implementation when Debug-formatted.Source§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
self to use its Pointer implementation when
Debug-formatted.Source§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
self to use its UpperExp implementation when
Debug-formatted.Source§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
self to use its UpperHex implementation when
Debug-formatted.Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§fn in_current_span(self) -> Instrumented<Self> ⓘ
fn in_current_span(self) -> Instrumented<Self> ⓘ
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> IntoSql for T
impl<T> IntoSql for T
Source§fn into_sql<T>(self) -> Self::Expression
fn into_sql<T>(self) -> Self::Expression
self to an expression for Diesel’s query builder. Read moreSource§fn as_sql<'a, T>(&'a self) -> <&'a Self as AsExpression<T>>::Expression
fn as_sql<'a, T>(&'a self) -> <&'a Self as AsExpression<T>>::Expression
&self to an expression for Diesel’s query builder. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);Source§impl<T> PgMetadataLookup for T
impl<T> PgMetadataLookup for T
Source§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
Source§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
Source§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
self and passes that borrow into the pipe function. Read moreSource§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
self and passes that borrow into the pipe function. Read moreSource§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
Source§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
Source§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
self, then passes self.as_ref() into the pipe function.Source§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
self, then passes self.as_mut() into the pipe
function.Source§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
self, then passes self.deref() into the pipe function.Source§impl<T> Pointable for T
impl<T> Pointable for T
impl<T> Read<Exclusive, BecauseExclusive> for Twhere
T: ?Sized,
Source§impl<T> Tap for T
impl<T> Tap for T
Source§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Borrow<B> of a value. Read moreSource§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
BorrowMut<B> of a value. Read moreSource§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
AsRef<R> view of a value. Read moreSource§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
AsMut<R> view of a value. Read moreSource§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Deref::Target of a value. Read moreSource§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Deref::Target of a value. Read moreSource§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap() only in debug builds, and is erased in release builds.Source§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut() only in debug builds, and is erased in release
builds.Source§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
.tap_borrow() only in debug builds, and is erased in release
builds.Source§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
.tap_borrow_mut() only in debug builds, and is erased in release
builds.Source§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
.tap_ref() only in debug builds, and is erased in release
builds.Source§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
.tap_ref_mut() only in debug builds, and is erased in release
builds.Source§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
.tap_deref() only in debug builds, and is erased in release
builds.